James-loudspeaker 53SA-7 User Manual download pdf

53SA-7

Assemble the parts

11”

22.5”

The brackets (Part No.

SA-BRKT-11-22) are

designed for 16” On-

center constructions,

however can be adjusted

to accomodate

construction from 11” to

22.5” joist spacing

(Fig. 1).

Attach the brackets to the speaker using the

supplied 8/32 screws , lock washers & flat washers .

Tighten these screws just enough to allow movement for

adjustment during installation.

Note: brackets can be mounted

to either the sides or the ends of the speaker for added

installation flexibility.

Tools Required:

1) #2 Phillips screwdriver

or drill with #2 Phillips

drill bit

2) Straight edge or level

3) Wood or drywall screws

1 - 53SA-7 or 53SAS-7

2 - Mounting Brackets

4 - 8-32 x 1/2 Pan Head

Machine Screws

4 - #8 Lock Washers

4 - #8 Flat Washers

4 - 6/32 Course Head Screws

1 - Foam Dust Guard

1 -Trim Ring

Spacer Ring(s)

Parts List: Supplied Parts: Supplied by Installer

4 - 1.25” Wood or drywall

screws

Parts: Ordered Separately

Fig. 3

Fig. 1

Installation guide for the 53SA-7 In-Ceiling Speaker.

Use optional spacer to adjust height

P/N SA53-SP-S-0.125

Attach the finishing trim kit

There are four trim kits

available to choose from

Fig. 17

Fig. 16

For omit spacer (a)

1/2” Drywall

For use spacer (b)

5/8” Drywall

If the drywall is in excess of 5/8”

add additional 1/8” spacers

as needed.

Fig. 18

Fig. 19

535 Airpark Road, Napa, CA 94558 | Ph: 707.265.6343 Fx: 707.265.6334 | www.jamesloudspeaker.com

SA53-5R-SR SA53-4S-SR SA53-5R-W SA53-4S-W

For Solid SurfacesFor Sheet Rock

Page 1Page 4

Fig. 2

Products suitable for use in

outdoor dry environments

63SA-7

Installation

Video

FREQ. RESPONSE

IMPEDANCE

SENSITIVITY

AMP RANGE

RMS POWER

50-22kHz +/-3dB

4 Ohms

88dB @ 2.83V/1M

50-125 Watts

50 Watts

Fig. 4

Fig. 15

BACK

ORDER

53SA-7-INSTALL 140618

Install foam dust guard

Drywall, tape, mud, etc.

Safely store the supplied grille for the final

assembly. If you also received the 53SAM-7

module, store this as well.

Fig. 20

If you received a 53SAS-7

preconstruction assembly, be sure to order

the 53SAM-7 module when ready for

finishing.

Recommend testing sub to assure all components

are working.

1 2

Summary of Contents

Page 1 - Tools Required:

53SA-71Assemble the parts11”22.5”The brackets (Part No.SA-BRKT-11-22) aredesigned for 16” On-center constructions,however can be adjustedto accomodate

Page 2 - 53SA-7 are identical

4Place the speaker on top of thethe temporary holders Page 35Expand the bracket to fit from joist to joist (Fig. 8). Then fix to the joists usinga dr

Comments to this Manuals

No comments

James-loudspeaker 53SA-7 User Manual

Browse online or download User Manual for Acoustics James-loudspeaker 53SA-7. James Loudspeaker 53SA-7 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Acoustics James-loudspeaker 53SA-7